Altek Eco bitumenblok a 17 Kg

Op voorraad: zie aantal (items) bij de kenmerken - aanvulling / op voorraad vanaf: datum onbekend, neem contact op: info@O-shops.nl

- , geschikt voor vloeien in de ketel tbv waterdichte lagen voor dak toepassingen, bitumen voegen vullen en overige toepassingen in de (wegen)bouw.

- Altek® ECO2B is a restructured bitumen stemming directly from the distillation of crude oil. This permits the bonding of heat insulators and waterproofing membranes, at a temperature much lower than oxidized bitumen

Application
- The recommended temperature of use is 160°C ± 20°C. Altek® ECO2B delivers the optimum performance of bonding, as a result of an optimum in properties such as fluidity,
adhesivity and traction resistance.
- To melt blocks of Altek® ECO2B at the right temperature, we recommande the use of temperature regulatedkettles.
- Temperatures above 170°C should be avoided. Above this temperature the performances of
- Altek® ECO2B may decrease.
- Packaging: Altek® ECO2B can be obtained in 17 kg blocks, wrapped in a thermofuse film, 54 blocks are packed on a pallet with a total weight around 900 kg
- Altek® is a registered brand of TotalEnergies.
- Safety Data Sheet are available on Internet : https://ms-sds.totalenergies.com

CHARACTERISTICS METHOD SPECIFICATIONS
Penetration at 25°C 1/10mm EN 1426 20 – 45
Softening Point °C EN 1427 90 – 120
Density at 25°C - EN ISO 3838 1000 – 1100
Flash point °C EN ISO 2592 250
Fraass Breaking Point °C EN 12593 £ -12
Viscosity at 160°C mPa.s NF EN 13702 180 – 250
Loss of weight after heating % EN 13303 < 0,5%